Drilling Into Rsj Beam Putting Up A Curtain Rail, I Have To Drill Into An RSJ. Can Anyone Suggest The Best Way To Do This?
Putting up a curtain rail, I have to drill into an RSJ. Can anyone suggest the best way to do this? - drilling into rsj beam
First, you are sure that an RSJ is a window?
It is more of a crash box, galvanized, which is much thinner.
Use an electric motor (either network or a good battery) Drilling and buy a small group of HSS drills (they look like gold) for about EUR 5.00.
Set the drill at low speed when you can and slowly drilling in the fall.
If you are too fast drilling and drill and damage could hold on his wrist.
So if you use a 5.5 to 6 mm drill, should b able to use red as a taco believe that there is drywall on the steel. If you do not screw in a car (about 1-2 cm depending on cutain railroad.)
Enjoy
|
4 comments:
With an electric drill, not the action of the hammer.
With a drill ............ What do you mean?
A good exercise HSS and the development of Sharp.
with a drill
Post a Comment